ulvis.paste.net

Paste Search Dynamic
Recent pastes
main.cf
  1. # Global Postfix configuration file. This file lists only a subset
  2. # of all parameters. For the syntax, and for a complete parameter
  3. # list, see the postconf(5) manual page (command: "man 5 postconf").
  4. #
  5. # For common configuration examples, see BASIC_CONFIGURATION_README
  6. # and STANDARD_CONFIGURATION_README. To find these documents, use
  7. # the command "postconf html_directory readme_directory", or go to
  8. # http://www.postfix.org/.
  9. #
  10. # For best results, change no more than 2-3 parameters at a time,
  11. # and test if Postfix still works after every change.
  12.  
  13. # SOFT BOUNCE
  14. #
  15. # The soft_bounce parameter provides a limited safety net for
  16. # testing.  When soft_bounce is enabled, mail will remain queued that
  17. # would otherwise bounce. This parameter disables locally-generated
  18. # bounces, and prevents the SMTP server from rejecting mail permanently
  19. # (by changing 5xx replies into 4xx replies). However, soft_bounce
  20. # is no cure for address rewriting mistakes or mail routing mistakes.
  21. #
  22. #soft_bounce = no
  23.  
  24. # LOCAL PATHNAME INFORMATION
  25. #
  26. # The queue_directory specifies the location of the Postfix queue.
  27. # This is also the root directory of Postfix daemons that run chrooted.
  28. # See the files in examples/chroot-setup for setting up Postfix chroot
  29. # environments on different UNIX systems.
  30. #
  31. queue_directory = /var/spool/postfix
  32.  
  33. # The command_directory parameter specifies the location of all
  34. # postXXX commands.
  35. #
  36. command_directory = /usr/sbin
  37.  
  38. # The daemon_directory parameter specifies the location of all Postfix
  39. # daemon programs (i.e. programs listed in the master.cf file). This
  40. # directory must be owned by root.
  41. #
  42. daemon_directory = /usr/lib/postfix
  43.  
  44. # The data_directory parameter specifies the location of Postfix-writable
  45. # data files (caches, random numbers). This directory must be owned
  46. # by the mail_owner account (see below).
  47. #
  48. data_directory = /var/lib/postfix
  49.  
  50. # QUEUE AND PROCESS OWNERSHIP
  51. #
  52. # The mail_owner parameter specifies the owner of the Postfix queue
  53. # and of most Postfix daemon processes.  Specify the name of a user
  54. # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
  55. # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
  56. # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
  57. # USER.
  58. #
  59. mail_owner = postfix
  60.  
  61. # The default_privs parameter specifies the default rights used by
  62. # the local delivery agent for delivery to external file or command.
  63. # These rights are used in the absence of a recipient user context.
  64. # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
  65. #
  66. #default_privs = nobody
  67.  
  68. # INTERNET HOST AND DOMAIN NAMES
  69. #
  70. # The myhostname parameter specifies the internet hostname of this
  71. # mail system. The default is to use the fully-qualified domain name
  72. # from gethostname(). $myhostname is used as a default value for many
  73. # other configuration parameters.
  74. #
  75. #myhostname = host.domain.tld
  76. #myhostname = virtual.domain.tld
  77. myhostname = yourhost.homeip.net
  78.  
  79. # The mydomain parameter specifies the local internet domain name.
  80. # The default is to use $myhostname minus the first component.
  81. # $mydomain is used as a default value for many other configuration
  82. # parameters.
  83. #
  84. #mydomain = domain.tld
  85. mydomain = $myhostname
  86.  
  87. # SENDING MAIL
  88. #
  89. # The myorigin parameter specifies the domain that locally-posted
  90. # mail appears to come from. The default is to append $myhostname,
  91. # which is fine for small sites.  If you run a domain with multiple
  92. # machines, you should (1) change this to $mydomain and (2) set up
  93. # a domain-wide alias database that aliases each user to
  94. # user@that.users.mailhost.
  95. #
  96. # For the sake of consistency between sender and recipient addresses,
  97. # myorigin also specifies the default domain name that is appended
  98. # to recipient addresses that have no @domain part.
  99. #
  100. #myorigin = $myhostname
  101. #myorigin = $mydomain
  102. myorigin = $mydomain
  103.  
  104. # RECEIVING MAIL
  105.  
  106. # The inet_interfaces parameter specifies the network interface
  107. # addresses that this mail system receives mail on.  By default,
  108. # the software claims all active interfaces on the machine. The
  109. # parameter also controls delivery of mail to user@[ip.address].
  110. #
  111. # See also the proxy_interfaces parameter, for network addresses that
  112. # are forwarded to us via a proxy or network address translator.
  113. #
  114. # Note: you need to stop/start Postfix when this parameter changes.
  115. #
  116. #inet_interfaces = all
  117. #inet_interfaces = $myhostname
  118. #inet_interfaces = $myhostname, localhost
  119. inet_interfaces = all
  120.  
  121. # The proxy_interfaces parameter specifies the network interface
  122. # addresses that this mail system receives mail on by way of a
  123. # proxy or network address translation unit. This setting extends
  124. # the address list specified with the inet_interfaces parameter.
  125. #
  126. # You must specify your proxy/NAT addresses when your system is a
  127. # backup MX host for other domains, otherwise mail delivery loops
  128. # will happen when the primary MX host is down.
  129. #
  130. #proxy_interfaces =
  131. #proxy_interfaces = 1.2.3.4
  132.  
  133. # The mydestination parameter specifies the list of domains that this
  134. # machine considers itself the final destination for.
  135. #
  136. # These domains are routed to the delivery agent specified with the
  137. # local_transport parameter setting. By default, that is the UNIX
  138. # compatible delivery agent that lookups all recipients in /etc/passwd
  139. # and /etc/aliases or their equivalent.
  140. #
  141. # The default is $myhostname + localhost.$mydomain.  On a mail domain
  142. # gateway, you should also include $mydomain.
  143. #
  144. # Do not specify the names of virtual domains - those domains are
  145. # specified elsewhere (see VIRTUAL_README).
  146. #
  147. # Do not specify the names of domains that this machine is backup MX
  148. # host for. Specify those names via the relay_domains settings for
  149. # the SMTP server, or use permit_mx_backup if you are lazy (see
  150. # STANDARD_CONFIGURATION_README).
  151. #
  152. # The local machine is always the final destination for mail addressed
  153. # to user@[the.net.work.address] of an interface that the mail system
  154. # receives mail on (see the inet_interfaces parameter).
  155. #
  156. # Specify a list of host or domain names, /file/name or type:table
  157. # patterns, separated by commas and/or whitespace. A /file/name
  158. # pattern is replaced by its contents; a type:table is matched when
  159. # a name matches a lookup key (the right-hand side is ignored).
  160. # Continue long lines by starting the next line with whitespace.
  161. #
  162. # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
  163. #
  164. #mydestination = $myhostname, localhost.$mydomain, localhost
  165. #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
  166. #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
  167. #       mail.$mydomain, www.$mydomain, ftp.$mydomain
  168. mydestination = localhost
  169.  
  170. # REJECTING MAIL FOR UNKNOWN LOCAL USERS
  171. #
  172. # The local_recipient_maps parameter specifies optional lookup tables
  173. # with all names or addresses of users that are local with respect
  174. # to $mydestination, $inet_interfaces or $proxy_interfaces.
  175. #
  176. # If this parameter is defined, then the SMTP server will reject
  177. # mail for unknown local users. This parameter is defined by default.
  178. #
  179. # To turn off local recipient checking in the SMTP server, specify
  180. # local_recipient_maps = (i.e. empty).
  181. #
  182. # The default setting assumes that you use the default Postfix local
  183. # delivery agent for local delivery. You need to update the
  184. # local_recipient_maps setting if:
  185. #
  186. # - You define $mydestination domain recipients in files other than
  187. #   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
  188. #   For example, you define $mydestination domain recipients in    
  189. #   the $virtual_mailbox_maps files.
  190. #
  191. # - You redefine the local delivery agent in master.cf.
  192. #
  193. # - You redefine the "local_transport" setting in main.cf.
  194. #
  195. # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
  196. #   feature of the Postfix local delivery agent (see local(8)).
  197. #
  198. # Details are described in the LOCAL_RECIPIENT_README file.
  199. #
  200. # Beware: if the Postfix SMTP server runs chrooted, you probably have
  201. # to access the passwd file via the proxymap service, in order to
  202. # overcome chroot restrictions. The alternative, having a copy of
  203. # the system passwd file in the chroot jail is just not practical.
  204. #
  205. # The right-hand side of the lookup tables is conveniently ignored.
  206. # In the left-hand side, specify a bare username, an @domain.tld
  207. # wild-card, or specify a user@domain.tld address.
  208. #
  209. #local_recipient_maps = unix:passwd.byname $alias_maps
  210. #local_recipient_maps = proxy:unix:passwd.byname $alias_maps
  211. #local_recipient_maps =
  212.  
  213. # The unknown_local_recipient_reject_code specifies the SMTP server
  214. # response code when a recipient domain matches $mydestination or
  215. # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
  216. # and the recipient address or address local-part is not found.
  217. #
  218. # The default setting is 550 (reject mail) but it is safer to start
  219. # with 450 (try again later) until you are certain that your
  220. # local_recipient_maps settings are OK.
  221. #
  222. unknown_local_recipient_reject_code = 550
  223.  
  224. # TRUST AND RELAY CONTROL
  225.  
  226. # The mynetworks parameter specifies the list of "trusted" SMTP
  227. # clients that have more privileges than "strangers".
  228. #
  229. # In particular, "trusted" SMTP clients are allowed to relay mail
  230. # through Postfix.  See the smtpd_recipient_restrictions parameter
  231. # in postconf(5).
  232. #
  233. # You can specify the list of "trusted" network addresses by hand
  234. # or you can let Postfix do it for you (which is the default).
  235. #
  236. # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
  237. # clients in the same IP subnetworks as the local machine.
  238. # On Linux, this does works correctly only with interfaces specified
  239. # with the "ifconfig" command.
  240. #
  241. # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
  242. # clients in the same IP class A/B/C networks as the local machine.
  243. # Don't do this with a dialup site - it would cause Postfix to "trust"
  244. # your entire provider's network.  Instead, specify an explicit
  245. # mynetworks list by hand, as described below.
  246. #  
  247. # Specify "mynetworks_style = host" when Postfix should "trust"
  248. # only the local machine.
  249. #
  250. #mynetworks_style = class
  251. #mynetworks_style = subnet
  252. #mynetworks_style = host
  253.  
  254. # Alternatively, you can specify the mynetworks list by hand, in
  255. # which case Postfix ignores the mynetworks_style setting.
  256. #
  257. # Specify an explicit list of network/netmask patterns, where the
  258. # mask specifies the number of bits in the network part of a host
  259. # address.
  260. #
  261. # You can also specify the absolute pathname of a pattern file instead
  262. # of listing the patterns here. Specify type:table for table-based lookups
  263. # (the value on the table right-hand side is not used).
  264. #
  265. #mynetworks = 168.100.189.0/28, 127.0.0.0/8
  266. #mynetworks = $config_directory/mynetworks
  267. #mynetworks = hash:/etc/postfix/network_table
  268. mynetworks = 127.0.0.0/8
  269.  
  270. # The relay_domains parameter restricts what destinations this system will
  271. # relay mail to.  See the smtpd_recipient_restrictions description in
  272. # postconf(5) for detailed information.
  273. #
  274. # By default, Postfix relays mail
  275. # - from "trusted" clients (IP address matches $mynetworks) to any destination,
  276. # - from "untrusted" clients to destinations that match $relay_domains or
  277. #   subdomains thereof, except addresses with sender-specified routing.
  278. # The default relay_domains value is $mydestination.
  279. #
  280. # In addition to the above, the Postfix SMTP server by default accepts mail
  281. # that Postfix is final destination for:
  282. # - destinations that match $inet_interfaces or $proxy_interfaces,
  283. # - destinations that match $mydestination
  284. # - destinations that match $virtual_alias_domains,
  285. # - destinations that match $virtual_mailbox_domains.
  286. # These destinations do not need to be listed in $relay_domains.
  287. #
  288. # Specify a list of hosts or domains, /file/name patterns or type:name
  289. # lookup tables, separated by commas and/or whitespace.  Continue
  290. # long lines by starting the next line with whitespace. A file name
  291. # is replaced by its contents; a type:name table is matched when a
  292. # (parent) domain appears as lookup key.
  293. #
  294. # NOTE: Postfix will not automatically forward mail for domains that
  295. # list this system as their primary or backup MX host. See the
  296. # permit_mx_backup restriction description in postconf(5).
  297. #
  298. #relay_domains = $mydestination
  299.  
  300. # INTERNET OR INTRANET
  301.  
  302. # The relayhost parameter specifies the default host to send mail to
  303. # when no entry is matched in the optional transport(5) table. When
  304. # no relayhost is given, mail is routed directly to the destination.
  305. #
  306. # On an intranet, specify the organizational domain name. If your
  307. # internal DNS uses no MX records, specify the name of the intranet
  308. # gateway host instead.
  309. #
  310. # In the case of SMTP, specify a domain, host, host:port, [host]:port,
  311. # [address] or [address]:port; the form [host] turns off MX lookups.
  312. #
  313. # If you're connected via UUCP, see also the default_transport parameter.
  314. #
  315. #relayhost = $mydomain
  316. #relayhost = [gateway.my.domain]
  317. #relayhost = [mailserver.isp.tld]
  318. #relayhost = uucphost
  319. #relayhost = [an.ip.add.ress]
  320.  
  321. # REJECTING UNKNOWN RELAY USERS
  322. #
  323. # The relay_recipient_maps parameter specifies optional lookup tables
  324. # with all addresses in the domains that match $relay_domains.
  325. #
  326. # If this parameter is defined, then the SMTP server will reject
  327. # mail for unknown relay users. This feature is off by default.
  328. #
  329. # The right-hand side of the lookup tables is conveniently ignored.
  330. # In the left-hand side, specify an @domain.tld wild-card, or specify
  331. # a user@domain.tld address.
  332. #
  333. #relay_recipient_maps = hash:/etc/postfix/relay_recipients
  334.  
  335. # INPUT RATE CONTROL
  336. #
  337. # The in_flow_delay configuration parameter implements mail input
  338. # flow control. This feature is turned on by default, although it
  339. # still needs further development (it's disabled on SCO UNIX due
  340. # to an SCO bug).
  341. #
  342. # A Postfix process will pause for $in_flow_delay seconds before
  343. # accepting a new message, when the message arrival rate exceeds the
  344. # message delivery rate. With the default 100 SMTP server process
  345. # limit, this limits the mail inflow to 100 messages a second more
  346. # than the number of messages delivered per second.
  347. #
  348. # Specify 0 to disable the feature. Valid delays are 0..10.
  349. #
  350. #in_flow_delay = 1s
  351.  
  352. # ADDRESS REWRITING
  353. #
  354. # The ADDRESS_REWRITING_README document gives information about
  355. # address masquerading or other forms of address rewriting including
  356. # username->Firstname.Lastname mapping.
  357.  
  358. # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
  359. #
  360. # The VIRTUAL_README document gives information about the many forms
  361. # of domain hosting that Postfix supports.
  362.  
  363. # "USER HAS MOVED" BOUNCE MESSAGES
  364. #
  365. # See the discussion in the ADDRESS_REWRITING_README document.
  366.  
  367. # TRANSPORT MAP
  368. #
  369. # See the discussion in the ADDRESS_REWRITING_README document.
  370.  
  371. # ALIAS DATABASE
  372. #
  373. # The alias_maps parameter specifies the list of alias databases used
  374. # by the local delivery agent. The default list is system dependent.
  375. #
  376. # On systems with NIS, the default is to search the local alias
  377. # database, then the NIS alias database. See aliases(5) for syntax
  378. # details.
  379. #
  380. # If you change the alias database, run "postalias /etc/aliases" (or
  381. # wherever your system stores the mail alias file), or simply run
  382. # "newaliases" to build the necessary DBM or DB file.
  383. #
  384. # It will take a minute or so before changes become visible.  Use
  385. # "postfix reload" to eliminate the delay.
  386. #
  387. #alias_maps = dbm:/etc/aliases
  388. #alias_maps = hash:/etc/aliases
  389. #alias_maps = hash:/etc/aliases, nis:mail.aliases
  390. #alias_maps = netinfo:/aliases
  391.  
  392. # The alias_database parameter specifies the alias database(s) that
  393. # are built with "newaliases" or "sendmail -bi".  This is a separate
  394. # configuration parameter, because alias_maps (see above) may specify
  395. # tables that are not necessarily all under control by Postfix.
  396. #
  397. #alias_database = dbm:/etc/aliases
  398. #alias_database = dbm:/etc/mail/aliases
  399. #alias_database = hash:/etc/aliases
  400. #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
  401.  
  402. # ADDRESS EXTENSIONS (e.g., user+foo)
  403. #
  404. # The recipient_delimiter parameter specifies the separator between
  405. # user names and address extensions (user+foo). See canonical(5),
  406. # local(8), relocated(5) and virtual(5) for the effects this has on
  407. # aliases, canonical, virtual, relocated and .forward file lookups.
  408. # Basically, the software tries user+foo and .forward+foo before
  409. # trying user and .forward.
  410. #
  411. #recipient_delimiter = +
  412.  
  413. # DELIVERY TO MAILBOX
  414. #
  415. # The home_mailbox parameter specifies the optional pathname of a
  416. # mailbox file relative to a user's home directory. The default
  417. # mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
  418. # "Maildir/" for qmail-style delivery (the / is required).
  419. #
  420. #home_mailbox = Mailbox
  421. #home_mailbox = Maildir/
  422.  
  423. # The mail_spool_directory parameter specifies the directory where
  424. # UNIX-style mailboxes are kept. The default setting depends on the
  425. # system type.
  426. #
  427. #mail_spool_directory = /var/mail
  428. #mail_spool_directory = /var/spool/mail
  429.  
  430. # The mailbox_command parameter specifies the optional external
  431. # command to use instead of mailbox delivery. The command is run as
  432. # the recipient with proper HOME, SHELL and LOGNAME environment settings.
  433. # Exception:  delivery for root is done as $default_user.
  434. #
  435. # Other environment variables of interest: USER (recipient username),
  436. # EXTENSION (address extension), DOMAIN (domain part of address),
  437. # and LOCAL (the address localpart).
  438. #
  439. # Unlike other Postfix configuration parameters, the mailbox_command
  440. # parameter is not subjected to $parameter substitutions. This is to
  441. # make it easier to specify shell syntax (see example below).
  442. #
  443. # Avoid shell meta characters because they will force Postfix to run
  444. # an expensive shell process. Procmail alone is expensive enough.
  445. #
  446. # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
  447. # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
  448. #
  449. #mailbox_command = /some/where/procmail
  450. #mailbox_command = /some/where/procmail -a "$EXTENSION"
  451.  
  452. # The mailbox_transport specifies the optional transport in master.cf
  453. # to use after processing aliases and .forward files. This parameter
  454. # has precedence over the mailbox_command, fallback_transport and
  455. # luser_relay parameters.
  456. #
  457. # Specify a string of the form transport:nexthop, where transport is
  458. # the name of a mail delivery transport defined in master.cf.  The
  459. # :nexthop part is optional. For more details see the sample transport
  460. # configuration file.
  461. #
  462. # NOTE: if you use this feature for accounts not in the UNIX password
  463. # file, then you must update the "local_recipient_maps" setting in
  464. # the main.cf file, otherwise the SMTP server will reject mail for    
  465. # non-UNIX accounts with "User unknown in local recipient table".
  466. #
  467. #mailbox_transport = lmtp:unix:/file/name
  468. #mailbox_transport = cyrus
  469.  
  470. # The fallback_transport specifies the optional transport in master.cf
  471. # to use for recipients that are not found in the UNIX passwd database.
  472. # This parameter has precedence over the luser_relay parameter.
  473. #
  474. # Specify a string of the form transport:nexthop, where transport is
  475. # the name of a mail delivery transport defined in master.cf.  The
  476. # :nexthop part is optional. For more details see the sample transport
  477. # configuration file.
  478. #
  479. # NOTE: if you use this feature for accounts not in the UNIX password
  480. # file, then you must update the "local_recipient_maps" setting in
  481. # the main.cf file, otherwise the SMTP server will reject mail for    
  482. # non-UNIX accounts with "User unknown in local recipient table".
  483. #
  484. #fallback_transport = lmtp:unix:/file/name
  485. #fallback_transport = cyrus
  486. #fallback_transport =
  487.  
  488. # The luser_relay parameter specifies an optional destination address
  489. # for unknown recipients.  By default, mail for unknown@$mydestination,
  490. # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
  491. # as undeliverable.
  492. #
  493. # The following expansions are done on luser_relay: $user (recipient
  494. # username), $shell (recipient shell), $home (recipient home directory),
  495. # $recipient (full recipient address), $extension (recipient address
  496. # extension), $domain (recipient domain), $local (entire recipient
  497. # localpart), $recipient_delimiter. Specify ${name?value} or
  498. # ${name:value} to expand value only when $name does (does not) exist.
  499. #
  500. # luser_relay works only for the default Postfix local delivery agent.
  501. #
  502. # NOTE: if you use this feature for accounts not in the UNIX password
  503. # file, then you must specify "local_recipient_maps =" (i.e. empty) in
  504. # the main.cf file, otherwise the SMTP server will reject mail for    
  505. # non-UNIX accounts with "User unknown in local recipient table".
  506. #
  507. #luser_relay = $user@other.host
  508. #luser_relay = $local@other.host
  509. #luser_relay = admin+$local
  510.  
  511. # JUNK MAIL CONTROLS
  512. #
  513. # The controls listed here are only a very small subset. The file
  514. # SMTPD_ACCESS_README provides an overview.
  515.  
  516. # The header_checks parameter specifies an optional table with patterns
  517. # that each logical message header is matched against, including
  518. # headers that span multiple physical lines.
  519. #
  520. # By default, these patterns also apply to MIME headers and to the
  521. # headers of attached messages. With older Postfix versions, MIME and
  522. # attached message headers were treated as body text.
  523. #
  524. # For details, see "man header_checks".
  525. #
  526. #header_checks = regexp:/etc/postfix/header_checks
  527.  
  528. # FAST ETRN SERVICE
  529. #
  530. # Postfix maintains per-destination logfiles with information about
  531. # deferred mail, so that mail can be flushed quickly with the SMTP
  532. # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
  533. # See the ETRN_README document for a detailed description.
  534. #
  535. # The fast_flush_domains parameter controls what destinations are
  536. # eligible for this service. By default, they are all domains that
  537. # this server is willing to relay mail to.
  538. #
  539. #fast_flush_domains = $relay_domains
  540.  
  541. # SHOW SOFTWARE VERSION OR NOT
  542. #
  543. # The smtpd_banner parameter specifies the text that follows the 220
  544. # code in the SMTP server's greeting banner. Some people like to see
  545. # the mail version advertised. By default, Postfix shows no version.
  546. #
  547. # You MUST specify $myhostname at the start of the text. That is an
  548. # RFC requirement. Postfix itself does not care.
  549. #
  550. #smtpd_banner = $myhostname ESMTP $mail_name
  551. #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
  552. smtpd_banner = $myhostname ESMTP dini_mueter (1.0)
  553.  
  554. # PARALLEL DELIVERY TO THE SAME DESTINATION
  555. #
  556. # How many parallel deliveries to the same user or domain? With local
  557. # delivery, it does not make sense to do massively parallel delivery
  558. # to the same user, because mailbox updates must happen sequentially,
  559. # and expensive pipelines in .forward files can cause disasters when
  560. # too many are run at the same time. With SMTP deliveries, 10
  561. # simultaneous connections to the same domain could be sufficient to
  562. # raise eyebrows.
  563. #
  564. # Each message delivery transport has its XXX_destination_concurrency_limit
  565. # parameter.  The default is $default_destination_concurrency_limit for
  566. # most delivery transports. For the local delivery agent the default is 2.
  567.  
  568. #local_destination_concurrency_limit = 2
  569. #default_destination_concurrency_limit = 20
  570.  
  571. # DEBUGGING CONTROL
  572. #
  573. # The debug_peer_level parameter specifies the increment in verbose
  574. # logging level when an SMTP client or server host name or address
  575. # matches a pattern in the debug_peer_list parameter.
  576. #
  577. debug_peer_level = 2
  578.  
  579. # The debug_peer_list parameter specifies an optional list of domain
  580. # or network patterns, /file/name patterns or type:name tables. When
  581. # an SMTP client or server host name or address matches a pattern,
  582. # increase the verbose logging level by the amount specified in the
  583. # debug_peer_level parameter.
  584. #
  585. #debug_peer_list = 127.0.0.1
  586. #debug_peer_list = some.domain
  587.  
  588. # The debugger_command specifies the external command that is executed
  589. # when a Postfix daemon program is run with the -D option.
  590. #
  591. # Use "command .. & sleep 5" so that the debugger can attach before
  592. # the process marches on. If you use an X-based debugger, be sure to
  593. # set up your XAUTHORITY environment variable before starting Postfix.
  594. #
  595. debugger_command =
  596.          PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
  597.          ddd $daemon_directory/$process_name $process_id & sleep 5
  598.  
  599. # If you can't use X, use this to capture the call stack when a
  600. # daemon crashes. The result is in a file in the configuration
  601. # directory, and is named after the process name and the process ID.
  602. #
  603. # debugger_command =
  604. #       PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
  605. #       echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
  606. #       >$config_directory/$process_name.$process_id.log & sleep 5
  607. #
  608. # Another possibility is to run gdb under a detached screen session.
  609. # To attach to the screen sesssion, su root and run "screen -r
  610. # <id_string>" where <id_string> uniquely matches one of the detached
  611. # sessions (from "screen -list").
  612. #
  613. # debugger_command =
  614. #       PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
  615. #       -dmS $process_name gdb $daemon_directory/$process_name
  616. #       $process_id & sleep 1
  617.  
  618. # INSTALL-TIME CONFIGURATION INFORMATION
  619. #
  620. # The following parameters are used when installing a new Postfix version.
  621. #
  622. # sendmail_path: The full pathname of the Postfix sendmail command.
  623. # This is the Sendmail-compatible mail posting interface.
  624. #
  625. sendmail_path = /usr/sbin/sendmail
  626.  
  627. # newaliases_path: The full pathname of the Postfix newaliases command.
  628. # This is the Sendmail-compatible command to build alias databases.
  629. #
  630. newaliases_path = /usr/bin/newaliases
  631.  
  632. # mailq_path: The full pathname of the Postfix mailq command.  This
  633. # is the Sendmail-compatible mail queue listing command.
  634. #
  635. mailq_path = /usr/bin/mailq
  636.  
  637. # setgid_group: The group for mail submission and queue management
  638. # commands.  This must be a group name with a numerical group ID that
  639. # is not shared with other accounts, not even with the Postfix account.
  640. #
  641. setgid_group = postdrop
  642.  
  643. # html_directory: The location of the Postfix HTML documentation.
  644. #
  645. html_directory = /usr/share/doc/postfix-2.8.7/html
  646.  
  647. # manpage_directory: The location of the Postfix on-line manual pages.
  648. #
  649. manpage_directory = /usr/share/man
  650.  
  651. # sample_directory: The location of the Postfix sample configuration files.
  652. # This parameter is obsolete as of Postfix 2.1.
  653. #
  654. sample_directory = /etc/postfix
  655.  
  656. # readme_directory: The location of the Postfix README files.
  657. #
  658. readme_directory = /usr/share/doc/postfix-2.8.7/readme
  659. home_mailbox = .maildir/
  660.  
  661. dovecot_destination_recipient_limit = 1
  662. virtual_transport = dovecot
  663.  
  664. smtpd_sasl_auth_enable = yes
  665. smtpd_sasl_type = dovecot
  666. smtpd_sasl_path = private/auth
  667.  
  668. virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf
  669. virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domain_maps.cf
  670. virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf
  671.  
  672. # Allow connections from trusted networks only.
  673. #smtpd_client_restrictions = permit_mynetworks, reject #goht nid, bäh! (cha keini mails meh empfange...)
  674. Replies to main.cf rss
Parsed in 0.032 seconds